For, to properly do repair his apartment or his house and get the process of repair of the maximum satisfaction and pleasure, should clearly define the stages of repair, that is, to identify the most important, what to do in the first place. Someone wants to change the layout of the premises, someone interior, someone to the floor or something else. And to make the most successfully realize all, that was intended, need all the stages and features of the repair plan.
From painting the walls is necessary to remove all the excess from them, including plaster, then you should make sure, that there are no cracks on the surface, potholes and other negative sectors. When you are found, you should carefully correct them simply, Fill the problem areas. Before painting the walls should also pay attention to the fact, whether on the walls traces of dirt and dust, so then there were no problems with gluing wallpaper and other difficulties.
If you do not want to do painting the walls or you do not know how to do it qualitatively, we advise you to make an order for the repair of your apartment .
If you need to tear off the wallpaper, but you can not do it, because they were strongly bonded, it is better to paint them the top, although this is not recommended. Dye problematic wooden surfaces by using varnish, but it should be done only if, when nothing can be done and need more drastic methods. It is worth remembering, that the drying oil paint can under release gases and oils, which leads to the formation of bubbles on the surface, adversely affecting the painted surface. It is therefore better not to paint a surface.
Regarding the choice of brushes and painting technique itself, everything here depends on the type of surface. for instance, for surfaces and edges of the angles is more suitable flat thin brush. Very widespread and roller, which is used on many types of surfaces.
Stir the paint is best with a drill with an attachment, because this method is the best and fastest. Dip the brush into the paint on the need for a bristle brush, so that the paint does not flowed to the shaft. Rest of the paint should be a slight movement to wipe the edge of the jar of paint and paint so the surface of the walls.
During the painting is not worth much to lean on the brush, better to do all this with an average strength. Apply the paint with costs broken down and immediately put just two vertical strips, and then spread them evenly over the entire surface. Cover the entire wall is not necessary, it is wise to work across sectors.
A source: wday.ru